Jon Buoys - EVACs - New Carcasses
Overview
General information shared by every carcass in this set.
Manufactured Date is required.
Capacity is required.
Serial Numbers
Enter how many carcasses you are registering and the first serial number. The list is filled in for you. Any serial can be changed.
| # | Manufacturers Serial Number | Actions |
|---|---|---|
Enter once for every carcass. If some carcasses differ (e.g. PRVs taken from a second batch), tick Differs between carcasses.
Entered for each carcass in the table below ↓
Values per carcass
Only the fields that differ are shown. Change a value, then use ↓ Fill down to copy it to every carcass below.
| # | Serial | |
|---|---|---|
|
|
Inspection
General inspection points. Ticking a point confirms it for carcasses. If a carcass fails, remove it from this set below; it is kept as a separate draft.
Buoyancy Tube Pressure Test
Test date, times and ambient conditions are shared by the set. Top pressure readings are entered per carcass below.
Readings per carcass
Corrected pressure and result are calculated as you type. Pass is within ±5% of the ON top pressure.
| Serial | Temp ON | Ambient ON | Top Pressure ON | Temp OFF | Ambient OFF | Top Pressure OFF | Corrected | Result | Actions |
|---|---|---|---|---|---|---|---|---|---|
°C |
mbar |
mbar |
°C |
mbar |
mbar |
✓ Pass ✕ Fail — |
Review
Check every carcass before sign off. Highlighted values differ from the rest of the set.
| Serial | Manufactured | Capacity | Top ON | Top OFF | Corrected | Result | |
|---|---|---|---|---|---|---|---|
| PassFail |
Approval / Sign off
Approved by is required.